A black plastic open mesh seedling tray - 350mm long x 295mm wide & 50mm in height.

A 30 hole black plastic tray with square holes.

From Thailand - this tray is suited to almost any 50mm dia. tube or any 50mm square tube.

Kit consists of 40 new 42 x 85mm deep tubes and 1 pre-used tray to hold tubes. 

A 24 hole black plastic carry tray from Thailand.  Length 450mm; width 275mm; height 45mm. The hole diameter at the top is 60mm; bottom hole diameter is 50mm.

Pots/Tubes suited to this tray are as follows.

Port Tube PT060, fits well into the pot holder even though it does not sit down on the bottom of the base

Port Tube PT050, sits down onto the base of the pot holder and while a little wobbly at the top of the holder - quite acceptable.

There may be other tubes that are able to be used in this tray.

A 15 hole black plastic carry tray for 80mm pots. The base of this tray has 2 cross bars on each of the compartments. Length 422mm; width 265mm; height 67mm. The hole diameter at the top is 78mm; bottom hole diameter is 61mm.

From Thailand, this tray is designed for X-007 and X-007C pots.

However other pots are able to be used in this tray.

Port Basket Pot PB065, fits well into the pot holder

Dome Tube JJ075DOME, sits down onto the base of the pot holder and while a little wobbly at the top of the holder - quite acceptable.

Dome Squat Pots JJ080DOME and JJ080CDOME - Fit in the pot holder but only go about half way down to the bottom of the holder.

There may be other pots that are able to be used in this tray.

A 12 hole black plastic carry tray for 100mm pot. The base of this tray has a bar across each of the compartments. Length 442mm; width 333mm; height 61mm. The hole diameter at the top is 95mm and at the bottom 86mm.

From Thailand, this tray is designed for X-010 and X-010C pots.

However other pots are able to be used in this tray.

Port Pot PP100, fits well into the pot holder

Dome Squat Pots JJ100DOME and JJ100CDOME - fit well into the pot holder.

Pot P 100 SS, sits down onto the base of the pot holder and is somewhat wobbly in the holder - but acceptable.

There may be other pots that are able to be used in this tray.

A 12 hole black plastic carry tray for 100mm pot. The tray has a star base on each of the compartments. Length 435mm; width 328mm; height 70mm. The hole diameter at the top is 93mm and at the bottom 72mm.

From Thailand, the following pots are able to be used in this tray.

Port Pot PP100D, sits down onto the base of the pot holder and is somewhat wobbly in the holder - but acceptable

Port Basket Pot PB080, sits down onto the base of the pot holder - is a bit wobbly in the holder - but acceptable

Basket Pot B-010 - fits well into the pot holder

Slatted Pot 3.5RB - fits well into the pot holder

Pot HP-040 - fits loosely into the pot holder but due to large taper and wide rim at the top, adjacent pots would foul on one another.

There may be other pots that are able to be used in this tray.

A 11 hole black plastic carry tray for 110mm pots. The dimensions of this tray are 521mm long x 349mm wide x 72mm high and the hole for the pot measures - top 111mm diameter and bottom 93mm diamenter.

This tray is for Thai pots that are not imported. However other pots are able to be used in this tray.

Port Pot PP100,  is quite wobbly but acceptable

Port Pot PP100D,  is quite wobbly but acceptable

Port Pot PP120D, fits to bottom - near perfect

Dome Squat Pots JJ120DOME and JJ120CDOME - wobbly but acceptable.

Pot JJ125 wobbly - but acceptable.

Clear Pot 150MCP - good fit

There may be other pots that are able to be used in this tray.

A 8 hole black plastic carry tray for 125mm pot. The base of this tray has a bar across each of the compartments. Length 438mm; width 398mm; height 70mm. The hole diameter at the top is 128mm and at the bottom 110mm.

This tray is for Thai pots that are not imported. However other pots are able to be used in this tray.

Port Pot PP100,  is quite wobbly but acceptable

Port Pot PP100D,  is quite wobbly but acceptable

Port Pot PP120D, fits to bottom - near perfect

Port Pot PB140 fits good.

Dome Squat Pots JJ140DOME and JJ140CDOME - fit well into the pot holder.

Dome Squat Pots JJ120DOME and JJ120CDOME - wobbly but acceptable.

Pot JJ125 wobbly - but acceptable.

Clear Pot 150MCP - good fit

There may be other pots that are able to be used in this tray.

A 6 hole black plastic carry tray for 130mm pots.    Tray dimensions are 504 mm long x 348 mm wide x 112 mm high  - Hole dimensions (top diameter : 131 mm – bottom diameter : 112 mm)

From Thailand, this tray is designed for X-013 and X-013C pots.

However other pots are able to be used in this tray.

Port Deep Pot PP120D, fits well into the pot holder

Pot JJ140B, fits well into the pot holder.

Dome Squat Pots JJ140DOME and JJ140CDOME - fit in the pot holder but only go about half way down to the bottom of the holder.

Pot 150MCP - fits in the pot holder but does not go right to the bottom of the holder.

There may be other pots that are able to be used in this tray.